How to use our drain cleaner:
-- Pump up the hand pump about 8 -10times, until could not pump into the air to get high pressure gas.
-- Install the appropriate plug according to the size of the pipe diameter.
-- Block pipe outlet, have it sealed; Pull the trigger to release the high pressure gas. (You could have it repeated till dredge the pipeline.)
-- Remove all loose articles from the sink before using the drain cleaner.
-- Plug or cover all over flow or air outlet openings on the same drain line on sinks, bathtubs, etc. With a wet terry cloth to prevent dirt or other material from spraining out while the drain cleaner is in use.When using a drainage cleaner to plug a toilet, cover the opening with a complimentary film to prevent debris and water from splattering up.
-- Tip for partly clogged pipes and drain : fill your drain pipe with warm water and light detergent before using the gun.The drain cleaner is only effective if the water level is above the top of the rubber adapter when it is placed over the blocked outlet.
-- For optimum use you do have to fill the clogged pipe or drain with water before using the gun.Any remaining air in the drain system will significantly reduce the cleaning power of the gun!
-- If you do not use the drain cleaner gun you do have to release any remaining air pressure.Never leave the gun unprotected while it is still under air pressure.Store the drain cleaner in a dark ,dry place.
-- 1 × Drain Cleaner
-- 4× Different Sized Suckers
-- 1× Instruction
-- 1× Splash Proof Film