5-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291)

Price: $15.99
Product prices and availability are accurate as of 2018-05-17 08:48:33 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Step 1: Turn off the water (at toilet's base). Step 2: Flush the toilet and ensure that the tank is fully empty (flush again if necessary). Step 3: Un-clip the flush chain. Step 4: Twist the stem counter-clockwise - this will require some force and you will hear a click. Step 5: Lift the flushing unit out from the toilet tank. Step 6: Replace the old seal with your new seal (only one seal per toilet). Step 7: Put the stem back in and twist clockwise to tighten. Step 8: Reinstall the flush chain. Step 9: Turn the water back on. Perfect replacement for your Kohler (TM) K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620. Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet! Compatible with all Kohler (TM) toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8". Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM gaskets (based on in-house testing). Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 5 for a great value! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Kohler (TM) OEM product and Impresa Products has no affiliation with or endorsement from this brand. Our product is not covered under any other manufacturer's warranty (except for Impresa Products). The Kohler (TM) brand name and logos are the registered trademarks of their owners. Any use of the Kohler (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Product Features

PERFECT REPLACEMENT for your Kohler (TM) K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620 CREATE A STRONGER FLUSH: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet! WORKS ON KOHLERS WITH FLUSH VALVE: Compatible with all Kohler (TM) toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8" 3 MINUTE INSTALL: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 5 for a great value! Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM gaskets (based on in-house testing)

Write a Review